null

Winchester XPR Long Action Tactical Rail 20MOA - Matte

(No reviews yet)
SKU:
154098
Condition:
New
$275.99
Winchester XPR Long Action Tactical Rail 20MOA - Matte

Maxima M686-20MOA Winchester XPR Long Action 20MOA
Machined from solid steel in both standard and 20 MOA configurations, Warne Tactical Rails are designed around the Mil-Spec Picatinny style rail system and provide a strong and true platform for optics mounting.

  • Low profile design allows use of iron sights when optics are removed.
  • Full width and depth recoil slots provide maximum bearing surface for recoil key engagement.
  • Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque is recommended.

Visually inspect your firearm"s receiver for burrs around the screw holes and remove if necessary. Remove all oil and grease from the holes in the receiver, the base screws and contact surfaces. Place the scope mount base(s) on the receiver. Check for proper fit and alignment. Using a T-15 wrench (supplied with WARNE rings) loosely install the supplied Torx 15 screws. If base(s) fit properly, firmly tighten screws.* WARNE recommends 25 in/lb torque.
*WARNE recommends the use of a REMOVABLE thread locking compound for best results.