Sales@herooutdoors.com
USD
Features
- Electronic resettable fuse
- Break force adjustment
- Active brake and rate of fire reduction
- Custom cut-off lever for reliable single fire
- Selectable firing modes and adjustable trigger sensitivity
- Diagnostic system with low battery alarm
- Adjustable Clicker with pretravel and overtravel
- Break force adjustment
- Programming supported with a multicolor LED diode
- DSG and DMR modes
Adjustable integrated Clicker - Simulating trigger of a real firearm, built-in Clicker requires certain force to be placed on the trigger to break it, before a shot can be fire. This force can be set to user's preferences, also including reducing it to zero. Pretravel (the leeway before the break is met) and overtravel (distance that trigger can travel when it is pulled all the way back) can also be adjusted.
Adjustable trigger sensitivity - The trigger can be set to 8 sensitivity levels for both first and second trigger stage, ranging from short pull needed to fire a shot, to a long one. No modification to the trigger or the gearbox is needed, and the trigger sensitivity change is possible even in the field.
Active brake - Active brake stops the motor after each shot preventing spring compression or in case of replicas with high rate of fire, overspin (double shot problem).
Precocking - Fast trigger response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, piston will remain in rear position after each shot with the spring already compressed, ensuring that next shot will be fired immediately after you pull the trigger. To release the spring after using precocking, pull the trigger and hold it for 2 seconds, after which a second shot will be fired, this time with no precocking and fully braked.
Selectable firing modes
User can choose firing modes available after short or long pull of the trigger: SEMI ONLY, BINARY, SEMI-AUTO, SEMI-BURST, BURST-AUTO.
Binary trigger
Allows for easy double shots in semi-automatic setting. After enabling this mode, if semi-automatic fire is set, shots will be fired not only when the trigger is pulled, but also when it is released.
Rate of fire reduction
Reduce the rate of fire in automatic or burst fire to save ammo or make the replica shoot in a more realistic fashion.
DSG
A sector gear detection mode specially prepared to work with dual sector gears.
DMR Mode
Required on some fields for DMR replicas. It allows only single shots and within certain time intervals. When enabled, follow-up shots cannot be fired sooner than after 0.25s, 0.5s, 1s, 2s or 3s, depending on chosen setting. It can also be used voluntarily for more realism - to force the shooter to not fire too fast, reflecting the effects of recoil in a real 7.62mm rifle.
Diagnostic system - Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier.
Electronic fuse - Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery when a short circuit or blocked motor is detected.
Manufacturer: Perun Airsoft
Specifications:
Permissible Battery Voltage: 7V to 17V
Compatibility: For use with Tokyo Marui, CYMA, G&P, Echo 1, JG and other compatible M14 AEG rifles
Wiring: Universal-wired
