Matrix Universal Smart Charger for 6V-12V NiMh & NiCd Battery Packs w/ Deans Adapter

Features

• Smart Charger (with automatic voltage detection) for NiMh RC and Airsoft battery packs 6V ~ 12V (6~10 cells)
• Universal for any NiMH /NiCd battery packs 6V - 12V (6-10 Cells pack); Worldwide usage with 110-240V AC
• Fast charger with current switch to select either, .9A and 1.8A
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life
• Safety protection fuse for over current, short circuit & reverse polarity protection
• Certifications: EMC, LVD, FCC, CE, RoHs

A smart charger is highly recommended for anyone still using a wall charger! A wall charger requires 4~5 hours of monitoring and you will never really know if a battery pack is fully charged, or over-charged. This smart charger will peak the battery charge, stop charging when full and provides a green/red led light indications so you never have to do any guess work.

Operation Instruction

• Connect battery pack to output connector and plug AC power source.
• Make sure battery polarity is connected correctly (Red wire is positive)
• Charger will detect battery voltage automatically, Red LED will be on during charging
• When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
• Battery will be charged at 0.9A or 1.8A constant current,
• Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
• The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V.
• Do not charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than 1100mAh.
• Battery pack must be made by high drain current cell.

Manufacturer: Matrix

Specifications:

Certifications: EMC, LVD, FCC, CE, RoHs
Package Includes: Charger, Small Tamiya Female, Large Male Tamiya to Small Female Adapter, Small Female Tamiya to DEANS Adapter
Compatibility: For 6v-12v Ni-Mh / Ni-Cd Battery Pack
Input: Input: AC110 - 240V
Output: 6-12V .9A or 1.8A

Please note: This Charger is for NiCd / NiMh type battery packs. NOT for Li-Polymer, Li-Mn, Li-Ion type battery packs. Charging a lipo battery pack with this charger will cause fire and serious injury.

Caution

• The charger is designed for indoor use only. Do not leave the charger unattended during charging.
• The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable / explosive goods.
• Do not cover the charger when charging, ambient temperature shall not be more than 40oC
• Do not leave batteries charging on flammable surfaces, wood surface or carpet.
• Cut off the power supply before connecting or disconnecting the charger from batteries.
• Do not try to disassemble the charger (High voltage inside)
• Mfg is not responsible for any damage and consequent damage caused by Misuse.