GATE Airsoft PicoAB MOSFET Unit w Active Braking Technology

GATE Airsoft PicoAB MOSFET Unit w/ Active Braking Technology

PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG. It can work with the smallest ASG replicas. The installation is very easy and the interference in the replica is limited only to running one or two additional wires from the contacts.

Features:

• Smallest MOSFET on the market
• Active braking technology
• Can handle 3v to 14.8v batteries
• 1 year limited warranty
• Wiring and heat shrink tubing included

Functions:

MOSFET:
Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET. It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you will gain higher rate of fire of the rifle and a faster trigger response, and the contacts will be protected against burn out.

Active Brake:
Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such high rate of fire that you are not able to make a single shot? Active brake will sort things out. In SEMI Mode, the brake will not allow for compressing the piston after a shot. The piston will stop in front position which eliminates unnecessary stresses, increasing the service life of Gearbox and its parts. It is very important, especially with an AEG power upgrade.
After releasing the trigger, the rifle immediately stops shooting. Thus, you will gain more realism and, additionally, won’t lose your precious ammunition.

Electronic Fuse:
A new MOSFET will never let you down on the battlefield. It is totally protected against overheating and short-circuits of the electrical system. In case of the rifle becoming jammed, it will protect the motor and the battery against any damage.

Digital Interface:
It provides full compatibility with micro-switches. It is fully resistant to contact bounce. You gain a bigger ROF, faster trigger response and your MOSFET becomes less heated.

3rd Generation Mosfet
Usage of most modern transistors and microcontroller enabled us to create the smallest and most reliable MOSFET in the market.

Compatibility: For Most Airsoft AEG Rifles. Installation required, professional installation recommended. Not compatible with AEGs with Micro Switches

Manufacturer: GATE