Sales@herooutdoors.com
USD
OOPS ASA - The OOPS ASA combines a low profile, ultra-easy on/off/purge function and front-mounted hose exit. As with all Eclipse markers since 2007 the Etek5 utilizes the T-Slot Rail. The Etek5 will also accept a POPS ASA.
NEW Zick3 Rammer Kit - The incredibly successful Zick3 kit is now to be found as standard on the Etek5!
Shaft4 Etek5 Barrel - Like the full Shaft4 barrel kit, the Etek5 barrel utilizes a 2-piece, reverse threaded construction with a longer rear control bore for increased efficiency and consistency. The barrel is internally finished identically to the Geo and Ego Shaft4 barrels but features simplified external machining. The rear bore is honed to 0.693diameter and both front and backs are compatible with Shaft4 Boost Kits and Tips.
Deftek Feed Offset Feed. The feed is offset to one side by a small amount. This prevents the balls that tumble into the breach from bouncing excessively and causing breaks and chops.
NEW Cure5 Bolt Again carried over from the Ego LV1, the Etek5 now has a Cure5 Bolt as standard, along with a body-contoured cut at the rear so the bolt blends seamlessly into the marker body. The Cure5 bolt helps the Etek5 shoot the most fragile of tournament grade paints without worry of breaks due to the bolt clipping paintballs in the feed stack.
Direct Mounted Solenoid - The Etek5 Minifold mounts the ever-faithful SMC solenoid directly to the marker body, directly adjacent to the rammer. There is just a single hose taking the LP air from the LPR to the Minifold where it is filtered for added protection against debris.
NEW Internal LPR With the same LPR found on the Ego LV1 the Etek5 offers precise control of LPR pressure, with an all new low profile and ergonomic design.
Fully Adjustable Trigger The Trigger rides in a self-lubricating trigger holder that clips neatly into the frame. This, combined with the magnetic trigger return mechanism, creates a smooth, positive trigger feel. It is adjustable for fore and aft stop as well as magnetic return strength.
Break Beam Sensor System Using the same components and software as the Ego BBSS system, the Etek5 ensures that the marker excels at preventing chopped balls in the breech. When enabled, the Etek5 will only fire once a ball has loaded into the breech. If the BBSS system sees any kind of fault, the software automatically overrides the system and the marker continues to fire at a greatly reduced rate.
LED Board - 3 tru-color LED indicators. These 3 clever LEDs allow easy programming of all the user definable parameters by greatly simplifying the programming process. The top LED indicates 10s of units, the middle displays 1s and the bottom shows 0.1 increments.
NEW Optional OLED - The Etek5 accepts a drop in 32x128 graphical OLED.
Programmable Firing Modes Etek5 has user-definable settings for Dwell, Ball-in- Place, Eyes-Off ROF, Capped ROF (un-capped in Semi 1), De-bounce, and Firing Mode. As standard the Etek5 has the capability to be set to cover every tourney regulation.
Dual Density Grips The Etek5 grips follow the same design as the Geo and EGO LV1 grips with an all new Unibody Foregrip.
The Etek5 utilizes glass-reinforced impact resistant composite parts for the frame, eye cover, feedtube and OOPS knob. All other materials are the same high grade alloys found in the Geo and Ego range of markers.
Weight: 100g / 2.2lb (with battery)
Length: 552mm
Height: 215mm
Depth: 31mm
Planet Eclipse Canadian Warranty Information
Make sure you look for the Green Canada / Eclipse Hologram sticker on the box!
Why? The extensive Planet Eclipse Dealer and Service Centre network within Canada will only deal with warranty issues on Planet Eclipse markers that have been bought through stores and dealers in Canada. The Hologram sticker is your proof that the marker has not been grey market imported. Check the box before you buy - protect yourself and your warranty.
All Planet Eclipse paintball guns sold at www.badlandspaintball.com bear the Green Canada / Eclipse Hologram sticker on the box.
